The back panel looks like one of the following images, depending on board model.Select the proper connector according to the style of S/PDIF speakers being used. Two types of S/PDIF connectors are available: coaxial (G) and optical (F).

Connect speakers to A, B, C, D, or E as shown in the figure below, up to eight speakers.After installing the audio driver from the Intel ® Express Installer CD, multi-channel audio can be enabled: Using the audio controller interface, retask jack A to be Rear Left/Right Out and retask jack C to be Center/LFE Out.Ĩ-channel audio is available only on certain Intel® Desktop Boards.Connect the center/subwoofer speakers to jack C.The HD Audio is the one to use as it has jack sensing (and what the Xonar DG front. Many cases have both 'HD Audio' and 'AC97' connectors for the front panel. In order to use the front panel jacks that must be plugged into the Xonar card. Using the audio controller interface, retask jack A to be Rear Left/Right Out. The front panel connections are most likely connected to the front panel audio jack on the motherboard.To set up multi-channel mode using four or six speakers, connect the speakers as follows: Mic In: Retaskable as Center/LFE ( Subwoofer) Out Line In: Retaskable as Rear Left/Right Out For example, the pink audio jack can support microphone input when the system configuration is set to stereo mode, 2-channel, and as Center/LFE or Rear Surround, when set to 6-channel mode. The back panel audio jacks support up to six speakers and are retaskable using the audio controller interface.Īudio jack retasking is a feature that allows a jack to support more than one function. Poor audio quality can occur if passive, non-amplified speakers are connected to this output. typically on integrated chipset the front jack is meant for headsets, while the back port is mainly for speakers, and not able to deliver much current, which results in weak bass mainly when used on your headset if the guy requires current. The green line out jack, located on the back panel, is designed to power either headphones or amplified speakers only.

Separate front and rear audio jacks